TECHNET Archives

February 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Happy Holden <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Tue, 14 Feb 2006 16:24:02 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (71 lines)
Glenn,
If you look at the nominals of variables and their tolerances that make up
the industry std. +/- 10% on impedances, to get to +/- 5% of SE 50 ohms or
DIFF 100 ohms TAKES a lot of improvements on all fronts, as the other
emails detail.  Under special circumstances (like sorting materials) the
+/- 5% or 2.5 ohms for a SE 50 ohms can be reached (we did it for RamBuss
at 28 ohms) but is will NOT be robust or a volume production process-just
HAND CRAFTED !  Not to mention the difficulty in using a TDR to an
accuracy of +/- 5%

Note     Fabrication Factors    For +/- 5 ohms          For +/- 2.5 ohms
                                For normal Products     For MemBus
*1       Core thickness             +/- 0.5 mil             +/- 0.3 mil
*2       Resin Content              50 +/- 3 %              50 +/- 2.5 %
*3        Board thickness        +/- 3  mil                  +/- 2  mil
              after Lamination
*4       Di-electric constant    4.4 +/- 0.3                  4.4 +/- 0.2
*5       Trace width control     +/- 0.8 mil                  +/- 0.5 mil
*6       Cu thickness control    +/- 0.5 mil                   +/- 0.3 mil
*7       S/M thickness               +/- 0.3 mil                       +/-
0.3 mil

Happy Holden
Asian Pacific Materials



Glenn Pelkey <[log in to unmask]>
Sent by: TechNet <[log in to unmask]>
02/14/2006 02:05 PM
Please respond to
TechNet E-Mail Forum <[log in to unmask]>; Please respond to
[log in to unmask]


To
[log in to unmask]
cc

Subject
[TN] Impedance Spec +/-5% and Cpk of 1.33






Hi folks,

Is the industry capable of this requirement?

Impedance +/-5% with a demonstrated Cpk of 1.33.

This could apply to Single Ended 50 ohms or 100 ohms Differential.
Also, this is on a Flex Circuit.

Thanks,

Glenn


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2