Thanks Lou,
Has anyone noticed another error in the amendment? 6.8.2.2 - High Voltage -
Solder Cups - Unused - a defect for the unused cup is if the insulation
clearance is greater than one wire diameter. If the cup is unused, where is
the wire coming from??????


>From: Lou Hart <[log in to unmask]>
>Reply-To: "TechNet E-Mail Forum." <[log in to unmask]>
>To: [log in to unmask]
>Subject: Re: [TN] Lead Length/Protrusion
>Date: Wed, 9 Jan 2002 09:38:10 -0500
>
>Olivia, maybe others will have noticed this, too, but Amendment 1 to 610C
>changes 2.3 to 2.5.  Lou Hart
>
>-----Original Message-----
>From:   Olivia Mc Dermott [SMTP:[log in to unmask]]
>Sent:   Wednesday, January 09, 2002 8:41 AM
>To:     [log in to unmask]
>Subject:        [TN] Lead Length/Protrusion
>
>Hi ALl,
>Why are there 2 references to lead length/protrusion in IPC-A-610C. In
>'Component Installation Location/Orientation' - point 5.2.7.1 table 5.2
>lead
>protrusion for class 2 is 2.5mm but in 'Soldering' point 6.2 table 6.1 lead
>protrusion for class 2 is 2.3mm. Which one do we use?
>
>_________________________________________________________________
>MSN Photos is the easiest way to share and print your photos:
>http://photos.msn.com/support/worldwide.aspx
>
>---------------------------------------------------------------------------------
>Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
>SET Technet NOMAIL
>To recieve ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search previous postings at: www.ipc.org > On-Line Resources & Databases >
>E-mail Archives
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
>additional
>information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
>ext.5315
>---------------------------------------------------------------------------------
>
>---------------------------------------------------------------------------------
>Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
>SET Technet NOMAIL
>To recieve ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search previous postings at: www.ipc.org > On-Line Resources & Databases >
>E-mail Archives
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
>additional
>information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
>ext.5315
>---------------------------------------------------------------------------------


_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To recieve ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------