Subject: | |
From: | |
Date: | 29 Jan 97 13:41:10 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Is there an industry standard for allowable defects, or x-outs, for panelized
PWBs? For instance, if a panel is 8-up, and there are 625 panels in the lot
(5000 pcs. total in the lot), what is a reasonable defect rate? A PWB
manufacturer has suggested 1 PWB per panel, and a max. of 10% of the panels in
the lot. For this example, that allows 62 panels with an x-out, which seems
excessive. The problem with the x-out is that the automatic pick and place
equipment will stuff the bad PWB unless manually overridden, so there will be
scrap component costs. Comments, please.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|