Subject: | |
From: | |
Reply To: | |
Date: | Fri, 23 Jun 2006 08:30:46 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
You could bake at the normal bake temperature to drive moisture that is
120C for 2 to 4 hours depending on the amount of moisture. But the key
to baking Immersion Tin or Silver boards is you must wrap them in
aluminum foil to prevent direct exposure of the boards to the oven
environment as sulphur is the biggest killer which would tarnish the
surface when in direct contact.
Also make sure the boards are not baked in the soldermask curing oven as
the solvent in the oven would contaminate the surface.......
Thanks & Best Regards,
Krishnan C
SANMINA-SCI
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Guy Ramsey
Sent: Friday, June 23, 2006 2:15 AM
To: [log in to unmask]
Subject: [TN] moisture and Immersion Silver / Tin boards
The humidity has arrived, and been around long enough to generate
concerns
about moisture content in PWBs for Pb-Free soldering.
Is there a bake cycle recipe that will drive moisture out of PWBs
without
compromising the solder performance of surface finishes like Immersion
Tin
or Immersion Silver?
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
________________________________________________________________________
_____
Scanned by Sanmina-SCI eShield
________________________________________________________________________
_____
CONFIDENTIALITY
This e-mail message and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail message, you are hereby notified that any dissemination, distribution or copying of this e-mail message, and any attachments thereto, is strictly prohibited. If you have received this e-mail message in error, please immediately notify the sender and permanently delete the original and any copies of this email and any prints thereof.
ABSENT AN EXPRESS STATEMENT TO THE CONTRARY HEREINABOVE, THIS E-MAIL IS NOT INTENDED AS A SUBSTITUTE FOR A WRITING. Notwithstanding the Uniform Electronic Transactions Act or the applicability of any other law of similar substance and effect, absent an express statement to the contrary hereinabove, this e-mail message its contents, and any attachments hereto are not intended to represent an offer or acceptance to enter into a contract and are not otherwise intended to bind the sender, Sanmina-SCI Corporation (or any of its subsidiaries), or any other person or entity.
_____________________________________________________________________________
Scanned by Sanmina-SCI eShield _____________________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|