Subject: | |
From: | |
Date: | Mon, 3 Feb 1997 10:24:25 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Following from the EMPF HelpLine; prepared by IPC-A-610B Master Instructor
Linda Zellars:
"J-STD-610 says: Nonconforming Process Indicator - Class 1,2,3 for
Blowholes, pinholes, and voids providing the solder connection meets the
requirtements of 4-1. Table 4-1 states that Class 2 and three have 75% hole
fill. If you can demonstrate that the solder fills at least 75% of the hole
then you have a process indicator. If not you have a defect."
If you would like to discuss this a bit to raise your comfort level of
understanding, please feel free to contact us directly.
******************************
>
>>>Date: Sun, 2 Feb 1997 19:33:50 -0800
>>>From: [log in to unmask] (Thomas D. Langlois)
>>>Subject: Pinholes - 610B vs. J-STD-001B
>>>
>>>I could use some opinions. Both IPC-A-610B & J-STD-001B clearly define
>>>minimum amounts of solder in a PTH. What about pinholes ? 610 addresses
>>>them, but not clearly, and I can't find reference to them in J-STD.
>>>Thanks.
>>>
>>>Tom Langlois
>>>Quality Trainer
>>>Hadco Corp. - VAM Division
>>>
***ALL NEW EMPF PHONE NUMBERS***
Jack Crawford, HelpLine Coordinator
Electronics Mfg. Productivity Facility
****NEW--317.655.3688
****FAX 317-655-3699
714 N Senate Ave, Suite 100
Indianapolis IN 46202-3112
VISIT OUR HOME PAGE AT: http://www.empf.org
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|