Regarding tented vias, my concerns are the same
as Bob's. We see problems such as:
1) bare copper in the center of the hole where
the solder mask does not reach
2) plugged on one end and not the other - makes
a dandy cup to trap any liquid materials the board
sees after solder mask application -
Susan Mansilla
Robisan Laboratory
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************