I have used milled dies in several high volume applications for flex 
     circuits and I have a list of several mill die shops.  I will give you 
     the two that I have dealt with the most and had good results.
     
     H&R Engraving, Inc
     Cerritos, CA.
     310-860-5571
     
     Lederie Machine Co.
     Kirkwood MO.
     800-821-5313
     
     John Coonrod
     Applications Engineering
     Rogers Corp.


______________________________ Reply Separator
_________________________________
Subject: Mill Dies
Author:  Duane B. Mahnke at Rogers-MCD
Date:    6/4/97 9:29 AM


From: Nelson Calimquim
Date: Tue, Jun 3, 1997 2:43 PM
Subject: Mill Dies
To: Duane B. Mahnke; TechNet
Hello TechNetters,
     
I am looking for any vendors that make Mill Dies for cutting flexible 
printed circuits.  These dies are similar to steel rule dies, however 
they are made using a CNC Mill Machine and hold a tighter tolerance.
     
Any information would be greatly appreciated.
     
Nelson P. Calimquim
[log in to unmask]
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   * 
* with <subject: subscribe/unsubscribe> and no text in the body.          * 
*************************************************************************** 
* If you are having a problem with the IPC TechNet forum please contact   * 
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      * 
***************************************************************************
     
     
----------
Received: from kani.wwa.com by post.fabrik.com
        with SMTP (Fabrik F07.0-000)
        id [log in to unmask] ; Tue, 3 Jun 1997 21:03:22 -0700
Received: by ipc.org (Smail3.1.28.1 #2)
        id m0wZ1Ei-000BjfC; Tue, 3 Jun 97 16:35 CDT
Resent-Sender: TechNet-request
Old-Return-Path: <[log in to unmask]>
Message-ID: <116BCFE61BCECF11BAD50000C0D195C6152AEE@NETSERVER_NT> 
From: Nelson Calimquim <[log in to unmask]>
To: TechNet <[log in to unmask]>
Subject: Mill Dies
Date: Tue, 3 Jun 1997 14:43:48 -0700 
X-Priority: 3
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.0.1389.3) 
Content-Type: text/plain
Resent-Message-ID: <"e1UEv3.0.mWR.pt8bp"@ipc> 
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/13128 
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
     
----------

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************