Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 15 Aug 2001 14:45:18 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
if you don't mind supplying me with your fax number, I can fax over some
considerations that we have used for panelizing boards.
--Dean Lillibridge
NEWvENTURE TECHNOLOGIES
(860) 253-7057
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of bbarr
Sent: Wednesday, August 15, 2001 1:46 PM
To: [log in to unmask]
Subject: [TN] Panelized Boards
I have a 3.5" x 5.5", .063" thick board we will be building in somewhat high
quantities (3,000+/month). This size board is just on the edge as far as
having to put it into a basket to run through our in-line aqueous cleaner to
keep it from moving around. I do not want the operators to have to put this
many boards in baskets during production runs. So, my thoughts have turned
to panelizing these boards, perhaps in a 2x2 arrangement. This would go
through the cleaner with no problem. I do not have a lot of experience in
the best designs for panels. What are the advantages/disadvantages between
v-score and tabs? If using tabs, how many are required to maintain the
rigidity of the panel during reflow? Does there have to be a border around
the boards? Are fiducials required on the panel in addition to the fiducials
already on the individual boards? Any other issues I may have missed?
Thanks.
Bob
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|