TECHNET Archives

June 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
ASSEM--PCB Marking Methods
From:
Bruce Gibson <[log in to unmask]>
Date:
Fri, 13 Jun 1997 15:13:16 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (18 lines) 
I am looking for a method to mark PCB's with lot numbers that can be
placed in various locations on the board depending on the product.  It
needs to be permanent and resistent to flux and solvents.  The method
needs to be automated with a feed mechanism, if possible.  I am thinking
of hot stamping, thermal transfer, ink jet, laser.  Is there anything
commercially available fot this purpose?

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2