Subject: | |
From: | |
Reply To: | |
Date: | Thu, 20 Nov 1997 16:38:21 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
John M LaFontaine wrote:
>
> According to IPC-A-610, Rev. B, if you are complying with class 2, then you
> cannot mount a lock washer directly on the laminate; you must use a flat
> washer, then the lock washer. However, 610B only illustrates this for
> split-ring lock washers. Does this same rule apply to external- or
> internal-tooth lock washers as well?
>
> J. LaFontaine
> Digi International
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
> ##############################################################
Yes John,
The flat washer is required for all types of locking washers, split or
internal / external star locking washers. Flat washers should also be
used under spring washers, such as the "Bellevue" (spelling ??).
Ralph
--
Ralph Hersey
Ralph Hersey & Associates
3885 Mills Way
Livermore, CA 94550-3319
PHN: 510.454.9805
FAX: 510.454.9805
e-mail: [log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|