125 to 150C has always worked well for me.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Nutting, Phil
Sent: Wednesday, November 02, 2016 10:21 AM
To: [log in to unmask]
Subject: [TN] tin/lead wave solder profiles

Hi all,

It has become difficult to find information related to tin/lead wave soldering.  We have a table top tin/lead wave solder system that we are having difficulty dialing in.  We are running Kester 197 flux and Kester 63/37 bar solder and producing thru-hole circuit boards for space applications.

I'm looking for typical 0.062" board parameters of top side board temperatures after fluxing and before hitting the wave.

Thanks in advance,

Phil Nutting  |  HVP Development Engineer   |  Excelitas Technologies Corp

Lab: +1 978.224.4332   |  Office: +1 978.224.4152
35 Congress St, Salem, MA  01970 USA
[log in to unmask]<mailto:[log in to unmask]>
www.excelitas.com<http://www.excelitas.com/>


[Excelitas R_emailsig]


Please consider the environment before printing this e-mail.
________________________________
This email message and any attachments are confidential and proprietary to Excelitas Technologies Corp. If you are not the intended recipient of this message, please inform the sender by replying to this email or sending a message to the sender and destroy the message and any attachments. Thank you.