.
Greater Boston IPC Designer's Council
March 25th Meeting announcement
Pleased to announce the reschedule of the February meeting
previously cancelled. This is a joint meeting with NEDDMA,
New England Design and Data Mananagement Association.
Topics: PWB Design for Manufacturability
PWB Fabrication
Speakers:
Brad Saunders, Lockheed Martin will speak on
design technology today and associated costs.
Included will be micro-via technology, thermal
management and electrical test options.
Dick Coburn, Hadco will speak on Fabrication
front-end engineering and tooling of customer
gerber data, for all steps from inner layer im-
aging through final fabrication and electrical
test.
Location (note change):
Wyndham Garden Hotel, Wheeler Rd Burlington MA.
From 95/128 South, proceed to exit 32b Middlesex
Turnpike. Turn Left off of ramp, under rt128 to
2nd set of lights, left on Wheeler Rd
From 95/128 North, take exit 32a/b cutoff, follow
to exit 32b Middlesex Turnpike. Turn left off of
ramp, take 1st left (at lights) onto Wheeler Rd.
Agenda:
5:00-6:00pm Networking *etc* <g>
6:00-6:45 Dinner, Sirloin Brochettes/Coffee/Dessert
6:45-7:00 NEDDMA business meeting
7:00-7:30 Brad Saunders, Sr Development Engineer,
Lockheed Martin
7:30-8:45 Dick Coburn, Customer Technical Support
Engineer, Hadco
Cost:
Dinner cost is $20 with reservation, $24 without reservation.
Make reseervations by March 20th by leaving a voicemail at
Jim Roderick's phone, 781 863 4610. If paying by check then
please make checks payable to NEDDMA, Inc. Remember that a
reservation is a commitment for the $20.
There is no cost for the meeting beyond dinner, and the
meeting is open to non-active Designer Council members as
well as members in full standing.
Regards to all!
--
Jeff Seeger Applied CAD Knowledge Inc
Chief Technical Officer Tyngsboro, MA 01879
jseeger "at" appliedcad "dot" com 978 649 9800
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|