Richard,  We have changed to AK225 for our vapor degreasers; we no longer
clean in bulk because these Genesolv replacements are too expensive to just
let them evaporate.   You can buy Genesolv2004 in aerosol cans and  it is
legal for use until Dec 31, 2004 (or maybe its Jan 1, 2004) ... That is what
we are using for work station or bench top  cleaning.  

Sheila Smith, Tracor, AES 



At 07:52 AM 6/12/97 -0400, you wrote:
>
>Hello,
>
>Two more questions for today:
>
>1- Does any one know about a replacement for Genesolv ? I heard about HFEs 
>($$$) and Axarel 32, but we would ideally need something that can be used is 
>small containers at people's workbench.
>
>2- How do you guys manage to keep to small components in place in the static 
>wave soldering bath for the solder-cut-solder operation ?  I know you can 
>preform the components with a lock-in shape, but is there other ways to 
>prevent components from lifting off the board ?
>
>Thank you all.
>
>Since my second question is at a very basic level, you can reply directly to 
>me at:
>[log in to unmask]
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
>* with <subject: subscribe/unsubscribe> and no text in the body.          *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact   *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
>***************************************************************************
>
>

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************