On one of our product, we have found that one of the inner layer has
misregistration.

Do you see any quality/ long term reliability problem associated with inner
layer misregistration? Our requirement was to have a 1 mil minimum annular
ring on all inner layers. What is the risk cum liability of accepting those
boards knowing that they are misregistered.

Misregistration occurred at 1mm BGA where the finished hole diameter is 9
mil on a 20 mil pads.

re,
ken patel
______________________________________________________
Ken Patel                       Phone:  (408) 490-6804
1708 McCarthy Blvd.             Fax:    (408) 490-6859
Milpitas, CA 95035              Beeper: (888) 769-1808

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################