Hi

The company I work for has, in its possession, the afore mentioned
Panasert screen printer, model number NM 2624G.

This model of screen printer only has provisions for eight different
programs to be stored in its memory at any one given time.  Good, if you
only require eight or less different stencils to be used.  Not so good if
you have more.

What I intend to do is connect the Panasert to a PC and store the
information on the PC which has a much greater capacity and download
the information to the Panasert on a as needed basis ( I have been told
this is possible ).  I am aware that the Panasert has a floppy disk drive,
but for various reasons ( Number one being that ours is poked ) I do not
wish to use this.

Does anybody have any documentation outlining the format that the
Panasert screen printers use to upload and download their information.

Many Thanks.


Mike Fitzgerald
Production Engineering
Mobile Radio Division
Tait Electronics Ltd.
------------------------------------------------------
558 Wairakei Road, PO Box 1645
Christchurch, New Zealand.
Direct Phone: (64)(3) 358 6663
Fax:               (64)(3) 358 3603
Mobile:           (025) 228 7068
Email:     [log in to unmask]
Internet: http://www.tait.co.nz
------------------------------------------------------

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################