Automata, Inc, 1200 Severn Way, Sterling, Virginia 22170, phone 
     703-450-2600, contact: Steve Silbert, Joe Ahearn. 
     I believe that the material is licensed by Zycon to board fabricators. 
     Please call if I can help further J. Zeinstra; 616-241-7879


______________________________ Reply Separator _________________________________
Subject: Buried capacitance material
Author:  <[log in to unmask]> at SMTPpost
Date:    6/13/97 3:27 PM


Can someone provide me some information on buried capacitance material. 
Specifically I am interested in  double sided .002 core 1/1 Zycon ZBC-2000 
material. This material has been specified on a drawing and I need to know the 
following information.
     
1. Is it available to any PCB shop?
2. Where do you get it?
3. What is the lead time? ( special materials many times take a while to get) 
4. Is there any special processing required? Specifically in the de-smear/ 
etchback
    process and drilling. 
     
Any help I can get would be greatly appreciated.
     
Ed Cosper
Director Quality Assurance and Engineering 
Graphic Electronics Inc.
Tulsa, OK     
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   * 
* with <subject: subscribe/unsubscribe> and no text in the body.          * 
*************************************************************************** 
* If you are having a problem with the IPC TechNet forum please contact   * 
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      * 
***************************************************************************
     
     


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************