Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Thu, 7 Aug 1997 13:05:08 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Tom,
I believe that Additive Services in Hudson, NH has developed a piece of
equipment
that would be ideally suited for your needs. I would suggest you contact
Arthur "Artie" DesMarais
at 603-889-1999.
Bob Furrow
Lucent Technologies
>----------
>From: Thomas Phelps[SMTP:[log in to unmask]]
>Sent: Thursday, August 07, 1997 12:11 PM
>To: [log in to unmask]
>Subject: [TECHNET] Etch cuts and drilling of finished raw boards
>
>I am in the process of evaluating equipment that could be used to meet our
>current raw board
>ECO needs (the cutting of surface traces and the drilling out of plated
>barrells). The ECO work needs to
>be done on the raw board at our facility (we only load PCBs). There does
>not appear
>to be an off the shelf machine that was designed specifically for these
>needs. It appears as though we
>would need to modify a drilling machine or modify an adhesive dispenser to
>meet our needs. We are
>concerned about depth control in the z direction and require vision for
>"bomb sight" programming.
>
>Questions:
>
>First of all, is anyone performing this type of rework on finished raw
>boards?
>
>If so, what methods are you using for etch cutting and the drilling of
>plated barrells?
>
>If your process is automated, what type of equipment are you using?
>
>Is the equipment an off the shelf item or is it customized?
>
>
>Any help would be greatly appreciated.
>
>
>Tom Phelps
>Teradyne
>(617) 422-3031
>
>
|
|
|