Subject: | |
From: | |
Date: | Tue, 10 Jun 1997 16:42:46 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello, everybody
I want to get some information on via plugging technology. In my
work, the plated through vias are 1.6mm deep and 300 micron in
diameter. I have to plug them before further processing. Any input
will be greatly appreciated.
Thanks in advance.
suixin zhang
ELIS-TFCG/IMEC, University of Ghent
Sint-Pietersnieuwstraat 41, B-9000 Ghent, Belgium
tel: 0032-9-2643371
fax: 0032-9-2643594
Email: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|