TECHNET Archives

June 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Copper thickness issues
From:
Thomas Waznis <[log in to unmask]>
Reply To:
[log in to unmask]
Date:
Fri, 25 Jun 1999 17:38:36 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (12 lines) 
I would specify 1.0 mil in the hole (standard measuring methods) except
for holes below 0.0135" diameter and/or boards thicker than 0.095" where
I would switch to 1.2 mil in the hole. If the application is easy
(thermal in use, assembly) 1.0 mil is ok. The 0.007" spec is ok for
commercial, light duty or microvia.

Just my opinion.

Tom Waznis
PCB MFG. Eng.
[log in to unmask]

ATOM RSS1 RSS2