Hi Dave,

You know I just realized a mistake I made and didn't catch it until your response. I must appologize to all the technet folks. The oversized panel Robert Ratliff is looking for is 12 X 48".  Jeezzz, I don't know what I was thinking when I typed 12 x 24. Please accept my humble appologies.  

Ed Cosper

----------
From:   David D Sullivan
Sent:   Friday, August 07, 1998 4:16 PM
To:     [log in to unmask]
Subject:        Re: [TN] manufacture of oversized pwb

Ed,

You might try Litton ACD in Springfield, MO, right down the highway.  I
used to call on both your shop and Litton as a MacDermid rep a few years
ago out of Springfield.  I remember the panel size in your shop approaching
18X24.  Have you gone down in size?

The competition in Chanute can build a DSB this size, if you want to
recommend them.  aslo, there is Harmon in Warrensburg, MO.

Regards,

Dave Sullivan
Rockwell Collins, Inc.
---------------------- Forwarded by David D
Sullivan/CedarRapids/Collins/Rockwell on 08/07/98 04:13 PM
---------------------------


PELCHAT_JM <[log in to unmask]> on 08/07/98 01:59:08 PM

Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
      to PELCHAT_JM <[log in to unmask]>

To:   [log in to unmask]
cc:
Subject:  Re: [TN] manufacture of oversized pwb




        We assemble this type of board for another medical industry
        Customer.  The board supplier(s) are Praegitzer and Altron.

        Jan Pelchat


______________________________ Reply Separator
_________________________________
Subject: [TN] manufacture of oversized pwb
Author:  Ed Cosper <[log in to unmask]> at 0UTG0ING
Date:    8/7/98 10:46 AM


Hi all,

I am looking for a bare board manufacture that has the ability and
experience to
build a 12 x 24" board for the medical industry. A potential customer has
contacted us regarding this part but we simply are not in the business of
building panels this size. I understand the part is still in the design
stages.

Also,  the customer is interested in finding out how other people put RF
shielding on the boards. I was given permisson to put his name and e-mail
address on this forum in hopes someone can help him.

If you can help please contact him. His name is Robert Ratcliff.
His e-mail is  [log in to unmask]

Thanks all,

Ed Cosper

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text
in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for
additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700
ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################