What kind of laser(s) does LPKF use (type, wavelength, power, etc.)
Joel
Joel S. Peiffer
3M Electronic Materials Solutions Division
3M Center, Building 201-1E-17
St. Paul, MN 55144
Tel: (651) 575-1464
Cell: (612) 327-1983
[log in to unmask]
From: Ahne Oosterhof <[log in to unmask]>
To: <[log in to unmask]>
Date: 06/17/2014 06:26 PM
Subject: Re: [TN] Laser depanelization
Sent by: TechNet <[log in to unmask]>
Hi Ed,
Try to get a sample done by LPKF.
12555 SW Leveton Drive, Tualatin, OR.
503-454-4202
Better lasers / much cleaner cut.
Ahne.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ed Popielarski
Sent: Tuesday, June 17, 2014 15:42 PM
To: [log in to unmask]
Subject: [TN] Laser depanelization
Hi all,
One of our aerospace customers is requesting boards depanelized from
support
frames.
I looked into router, but the conformal coating tends to smear and will be
a
significant FOD issue later.
We are willing to invest in laser, however, the result is a bit of
charring
on the edge, not much of a surprise. Unfortunately, this example
http://stevezeva.homestead.com/Capture.JPG was rejected on IPC-A-610-Rev E
Para. 10.7.4 "Solder Mask Coating-Discoloration" "Burned or charred solder
mask material.
In my opinion, this is not within the "spirit of the law" since there are
no
specific provisions for laser depanelization, only marking.
Anyone know of some way around this?
Ed Popielarski
Engineering Manager
[cid:[log in to unmask]]
970 NE 21st Ct.
Oak Harbor, Wa. 98277
Ph: 360-675-1322
Fx: 206-624-0695
Cl: 949-581-6601
"It's one kind of victory to slay a beast, move a mountain, and
cross
a chasm, but it's another kind altogether to realize that the beast, the
mountain, and the chasm were of your own design."
https://maps.google.com/maps/myplaces?hl=en&ll=48.315753,-122.643578&spn=0.0
11188,0.033023&ctz=420&t=m&z=16&iwloc=A
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|