Jon,

Please, selective robotic coating does NOT eliminate masking - maybe you are
the lucky one, ask others who have such systems. They do minimise masking,
no doubt about that.

Regards
Graham Naisbitt
[log in to unmask]
Web: www.concoat.co.uk
Concoat Ltd
Alasan House, Albany Park
CAMBERLEY GU16 7PH
Tel: +44 (0) 1276 691100
Fax: +44 (0) 1276 691227

-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Jon Moore
Sent: Monday, December 18, 2000 10:14
To: [log in to unmask]
Subject: Re: [TN] masking for conformal coating


In a message dated 12/18/2000 11:55:11 AM US Eastern Standard Time,
[log in to unmask] writes:

<< our manufacturing uses tape to mask areas (test points, leds, connectors)
 from conformal coating
 and it takes too long.
 are there any other options for masking from conformal coating to speed up
 the process ?

 thanks in advance

 Leo Flick >>
The obvious one to me is to pick a selective coating system for application
of the conformal coating and eliminate the masking completely.

Jon Moore

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------