Hello Joann,

I actually know the answer to your question!  The code numbers in
parentheses after the terms refer to technologies associated with each
term.  For example, Code #1 refers to General Interconnecting and
Packaging Terms, while Code #13 terms are Cleaning Terms.  Appendix B of
IPC-T-50 lists the codes and technologies.

Hope this helps.

Christy Graham
Nortel Micom
(805) 577-2210
[log in to unmask]

> -----Original Message-----
> From: Joann Amerson [SMTP:[log in to unmask]]
> Sent: Wednesday, June 10, 1998 12:51 PM
> To:   [log in to unmask]
> Subject:      Re: [TN] IPC-T-50
>
> Hi fellow TechNettarians!
>
> Okay, today's dumb question is...........(drum roll please)..What are
> the code
> numbers listed after the terms in IPC-T-50?  Should those numbers mean
> somthing to me?  If so, care to let me in on it?  Please?
>
> As always I appreciate all answers and your unending patience with the
> new
> kid on the block.  :-)
>
>
>
> JoAnn L. Amerson
> Design Librarian
> Red Lion Controls, Inc.
> E-mail: [log in to unmask]
> Voice: (717) 767-6961 ext 6308
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################