Date sent:              Thu, 13 Aug 1998 11:25:52 -0500
Send reply to:          TechNet <[log in to unmask]>
From:                   Automatic digest processor <[log in to unmask]>
Subject:                TechNet Digest - 13 Aug 1998 - Special issue
To:                     Recipients of TechNet digests <[log in to unmask]>

Ryan,

First, there shouldn't be any fumes around the system if you have adequate
ventilation.

If you're opening the system to work on it, a respirator with an acid mist rating
would be advised.  There are cartridges rated for dust, mist, fumes, etc.  Check
the Grainger Book or www.grainger.com or call Willson or North (respirator
manufactures).

Bob Mesick


> Subject: Respirators
>
> Does anyone know what filters I should be ordering for wave
> soldering?  I am trying to protect myself and the operators.
>
>


Remco Engineering
Water and Wastewater Treatment Systems
http://www.remco.com
[log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################