OK, Ioan,
First, i want to know if is necessary to place solder paste or flux/gel in the BGA's pad's? My Pick & Place machine (Europlacer R.250) don't place BGA's. So, is necessary to place solder paste with my screen printer?
....
I have 12 board's with BGA's. 11 pcb's with one BGA217 and another pcb with one BGA-352 and two BGA-217.
I have a bad soldering underneath. I don't have X-Ray inspection. I have the boundary scan. So my collegue in test give me the open points in the BGA. The alignment of the BGA is maked with the BGA-3000 rework machine.
Another thing, is better to solder the BGA's with convection reflow or infrared.
Thanks,
Jorge Casimiro, EID (Portugal)
Industrial Eng.
----- Original Message -----
From: Tempea, Ioan <[log in to unmask]>
To: <[log in to unmask]>
Sent: Quarta-feira, 1 de Setembro de 1999 22:05
Subject: Re: [TN] Soldering BGA-352
> Could you describe the problem Jorge?
>
> You burn the PCB, you get bad soldering underneath (open, bridge), you
> cannot align the BGA on the pads,...?
>
> How do you go about the other BGAs?
>
>
> > -----Original Message-----
> > From: Jorge Casimiro [SMTP:[log in to unmask]]
> > Sent: Wednesday, September 01, 1999 11:57 AM
> > To: [log in to unmask]
> > Subject: [TN] Soldering BGA-352
> >
> > I have a BGA-3000 rework machine from OK Industries and now i have
> > problems to soldering a BGA-352 from Texas Instruments (TMS320C6201).
> >
> > I need help for soldering the BGA-352 with the BGA-3000 or without.
> > Someone have a BGA-3000?
> >
> > Thanks,
> >
> > Jorge Casimiro, EID (Portugal)
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|