I have ANSI Y32.2-1975/CSA Z99-1975/IEEE Std 315-1975, "Graphic Symbols for
Electrical and Electronic Diagrams," Supplimented by ANSI/IEEE Std 315A-1986,
both published by:

IEEE,Inc.
345 East 47th St.
New York, NY
10017

 Hopefully you can find something a little more current but this should
give you a starting point.


          Tom Martin, PC Board Designer
          Dept 681
          Philips Consumer Electronics Co.
          P.O.Box 14810
          Knoxville, TN 37914-1810
          USA
          (615) 521-4785
          FAX (615) 521-3650
          INTERNET = [log in to unmask]

 
----- Begin Included Message -----

>From [log in to unmask] Tue May  9 15:20:13 1995
Resent-Date: Tue, 9 May 1995 21:19:44 +0200
Old-Return-Path: <miso!emc.com!gnieski>
To: [log in to unmask]
Resent-Message-Id: <"Vq82p.0.GW8.4uwhl"@ipc>
Resent-From: [log in to unmask]
Subject: Unidentified subject!
X-Mailing-List: <[log in to unmask]> archive/latest/483
X-Loop: [log in to unmask]
Resent-Sender: [log in to unmask]
Content-Length: 211
X-Lines: 9

Is there any national standard or IPC standard for
making electronic symbols for CAD systems and schematics ?

Also, does the IPC have or plan to have a web page on
the internet ?

Mike Gnieski
[log in to unmask]



----- End Included Message -----