Subject: | |
From: | |
Reply To: | |
Date: | Thu, 1 Apr 2010 09:06:57 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Steve,
Just to clarify my comments a bit more.
I understand that the area you are speaking of is for wirebonding only.
However, since the entire assembly is electroless Au plated, is there
somewhere else where a wiping contact is being made [outside of the bonding
area]?
A good example from hybrid days is a hermetic coaxial connector. Needs to
be mated/de-mated many times on the outside and wirebonded to on the inside.
First apply the underlying Ni. Then, plate the center contact with
electroless [hard] Au all over + soft gold all over, making it wirebondable
on the inside and of reasonable durability on the outside. [did not have to
be concerned with solderability]
This is exactly what you have - and it has been around for a long time.
Possibly someone is cutting & pasting from another not-so-applicable
document...? Doesn't hurt to ask them what they are up to.
Myself, given 150 µinches of Ni under 50 µinches of pure soft gold, I would
nearly be in heaven bonding to it. I only wish I could have had that on
some boards I've dealt with. Like being on a nice warm sunny beach with my
beautiful wife in one hand and a nice cool drink in the other - it would not
get much better!
Depending upon prior processing conditions, they could likely get away with
no more than 20-30 µinches and not even be aware of the reduction in soft
gold thickness.
Sometimes it is also a good thing to look at the amount of area actually
being plated. If it is a small area, the cost differential between 30 & 50
µinches may not be all that great. If you were plating an entire 18 x 24"
panel - well then, I wouldn't mind having the extra 20 µinches to help pay
the bills.
If not making a contactor somewhere else on the assy, I too do not
understand why the e-less Au is needed. The 150 µin of Ni will do a great
deal to prevent any Cu diffusion.
As far as corrosion goes ... if the environment is THAT bad, why are you
placing a bare [or glob topped, etc] die there?
Be interesting to hear what kind of story you get back.
Steve Creswick
http://www.linkedin.com/in/stevencreswick
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|