Hi Brien,
Phil Bravaro is actually the Technetter who is dealing with these
connectors...
Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Bush, Brien
Sent: Monday, February 24, 2014 11:25 AM
To: [log in to unmask]
Subject: Re: [TN] Laser Thru hole soldering equipment - Bayesian Filter
detected spam
Steve,
Is it possible to mask of the end of the pins before soldering?
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Bavaro
Sent: Monday, February 24, 2014 12:49 PM
To: [log in to unmask]
Subject: Re: [TN] Laser Thru hole soldering equipment - Bayesian Filter
detected spam
Three row 59 position receptacle assy
Airborn RM32209-059-541-02567-H90
Incon AAA059A027A000EZ
These are .075" spaced pins which have gold stacking pins (.244")
protruding through a .063" PWB. The top of the gold plated pins cannot
get contaminated with solder.
-----Original Message-----
From: Steve Gregory [mailto:[log in to unmask]]
Sent: Monday, February 24, 2014 9:37 AM
To: [log in to unmask]; Bavaro, Phillip @ MWG - TW
Subject: RE: [TN] Laser Thru hole soldering equipment
Hi Phil,
Can you give a part number of the connector? They aren't PC104
connectors are they?
Steve
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Bavaro
Sent: Monday, February 24, 2014 10:03 AM
To: [log in to unmask]
Subject: [TN] Laser Thru hole soldering equipment
I have a technical challenge that I need some quick expert help with....
We need to automate a thru hole stacking connector and were hoping to be
able to use a laser soldering system.
How many of you out there actually do this type of selective soldering
already and what equipment is recommended?
The stacking connector requires special treatment as the gold contacts
cannot become contaminated with the solder. We have three row
connectors which take a long time (few hours) to properly solder even
with the most experienced operators. The center pins seem to be
impossible for the automated systems to access with the solder feed
systems.
Any help is appreciated.
________________________________
This message and any attachments are solely for the use of the
addressee and may contain L-3 proprietary information that may also be
defined as USG export controlled technical data. If you are not the
intended recipient, any disclosure, use or distribution of its content
is prohibited. Please notify the sender by reply e-mail and immediately
delete this message and any attachments.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
WARNING: Export Control This message, including any attachments, may
contain technical data within the definition of the International
Traffic in Arms Regulations (ITAR), and subject to the Export Control
Laws of the U.S. Government. Transfer of such information by any means
to a foreign person, whether in the United States or abroad, without
proper export authorization or other approval from the U.S. Department
of State is prohibited.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud
service.
For more information please contact helpdesk at x2960 or
[log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|