Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 7 Sep 1999 23:06:50 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Nick,
I'd hope you were catching these after etch and not at final.
AOI after etch is the way to go there. At final I'm not sure what you
can do besides a close visual inspection. Assuming panels/circuits are
coated with mask.
Electrically if you test each circuit for impedance you would
probably catch the nicks but I don't know how you would fare with
dishdowns. Also to do impedance calculations on all the traces would
be tedious to say the least.
If you are seeing alot of fallout for this at final I'd spend my
efforts upstream to determine what was causing it especially if its
occuring after etch.
Hope this helps.
Mike Doty
Hadco TCE
______________________________ Reply Separator _________________________________
Subject: [TN] detect method on nick or dish down circuit.(urgent)
Author: Nicholas LAI <[log in to unmask]> at smtplink-hadco
Date: 9/8/99 10:16 AM
Hello all
Is there any testing method to detect and sort out the following defective PCB
in final QC section.
(1)nick cicuit.
(2)dish down cicuit.
Best Regard,
Nicholas Lai
9/8/99
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|