In my experience a break out condition on an unsupported hole is a night mare when you go to solder especially by hand. The breakout causes the rest of the pad to lift and then good luck trying to get any type of solder joint.
Kat
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2715.400" name=GENERATOR></HEAD>
<BODY style="MARGIN-TOP: 2px; FONT: 8pt MS Sans Serif; MARGIN-LEFT: 2px">
<DIV><FONT size=1>In my experience a break out condition on an unsupported hole
is a night mare when you go to solder especially by hand. The breakout
causes the rest of the pad to lift and then good luck trying to get any type of
solder joint. </FONT></DIV>
<DIV><FONT size=1></FONT> </DIV>
<DIV><FONT size=1>Kat</FONT></DIV></BODY></HTML>
