Dear Mr.Charlie,
        Thank you very much, I will try.

With best regards,
Noppadol S.


At 10:58 22/8/98 -0500, Charles Barker wrote:
>Noppadol,
>Try looking in: http://www.accuscore.com/faqs.htm
>They have a very good paper on scoring there.
>Good luck.
>Charlie B.
>
>
>
>
>Noppadol Sansupa <[log in to unmask]> on 08/22/98 05:11:16 AM
>
>Please respond to "TechNet E-Mail Forum." <[log in to unmask]>; Please respond
>      to Noppadol Sansupa <[log in to unmask]>
>
>To:   [log in to unmask]
>cc:    (bcc: Charles Barker/US/I-O INC)
>Subject:  [TN] PCB panel design.
>
>
>
>
>Dear sir/madam,
>        I am in the process of panel design for the FR-4 double sides 1 oz
>PCB,
>0.4 mm thickness and 1.475 x 1.087 square inch dimension. This is the first
>designing job for me, I'm looking for the information about the V-cut and
>perforation requirement. Does anyone can give me some information regarding
>the following I will appreciate very much.
>        1. The critical requirement for panel designing.
>        2. With the 0.4 mm thickness substrate, should I select the v-cut
>technic
>or perforation technic for depanelling to serve the firm board during
>assembly and easy to brake after assembly.
>        3. How to calculate the v-cut depth relate to the substrate
>thickness.
>        Further information that is necessary for panel design please
>advise.
>        I look forward to hearing from someone.
>
>With best regards,
>Noppadol S.
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section
>for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
>847-509-9700 ext.312
>################################################################
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################