Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 21 Mar 2002 08:25:53 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
As the circuitry width become finer (3/3 mil, 2.5/2.5mil), I would like to know
whether the line width tolerance got new specification or not.
For PCB, the general IPC standard is 20% of circuitry width. Let's say
circuitry width 6mil got +30um tolerance. If circuitry width 3mil, do we still
use 20% of circuitry width as the specification. Does IPC have the new
specification for fine lines? Or from the PCB design point of view, what should
be the general tolerance for 3/3mil and 2.5/2.5mil?
Wish your helpful information!
Best regards!
Li Juan
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|