Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 15 Aug 2001 11:27:33 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Steve,
It seems to have worked quite well. Thanks.
Richard
At 02:04 PM 8/15/01 -0400, you wrote:
> >>"are your operators consciencious about picking up/saving and
> >>hand placing dropped parts?"
>
> Oh man....with all due respect, I'd surely not advise doing this. With
>the size
>of most SMT parts, the lack of marking, and the relatively cheap cost of
>most of them
>compared with the cost of diagnose> test> rework> retest, etc, I'd
>generally
>advise not ever doing this!
>
> If things are falling off in such quantities so as to make it
>economically
>feasible to reuse the parts, then the SMT process engineer should
>investigate
>the root cause and fix it, rather than try and reuse fallout....
>
> Rgds and good luck!
> John
>-=-=-=-=-=-=-=-=-=-=--=--=-=-=-=-=
>John Brewer
>Square D Component Engineering
>Raleigh NC
>
>---------------------------------------------------------------------------
>------
>Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt delivery of Technet send the following message: SET
>Technet NOMAIL
>Search previous postings at: www.ipc.org > On-Line Resources & Databases >
>E-mail Archives
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
>ext.5315
>---------------------------------------------------------------------------
>------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|