Michael,

What is the distance between the boards, i.e. how tall should the connector
be?

If this distance is greater than one inch, you will probably need the coax
cables...

Mike Khusid
Signal Integrity Engineer
Sitara Networks Inc.

> -----Original Message-----
> From: Michael Forrester [mailto:[log in to unmask]]
> Sent: Tuesday, January 09, 2001 9:47 AM
> To: [log in to unmask]
> Subject: [TN] High Freq. Connectors
>
>
> We are currently designing a fully modular PCA with each
> circuit section on a
> different PCB.  I am looking for a connector, or connector system,
> that can handle a bandwidth of atleast 10 GHz with 50 ohm
> terminated lines.
> There are a maximum of 16 high speed connections per board.  The
> system overall has as many as 20 boards in it.  Soldering
> coax cables would be a
> manufacturing nightmare.  If anyone has any ideas, or know of
> someone who does, I would greatly appreciate any help.  Thank you.
>
> Best Regards,
>
> Michael Forrester
>
> --------------------------------------------------------------
> -------------------
> Technet Mail List provided as a free service by IPC using
> LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with
> following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following
> message: SET Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources
> & Databases > E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm)
> for additional
> information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> --------------------------------------------------------------
> -------------------
>

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------