Use metal cages to put the small boards, but be sure keep the height
     very low.

     With this cages you can use your big Cleaner to wash small boards.


     Mauricio


______________________________ Reply Separator _________________________________
Subject: [TN] Washing of small PCB
Author:  "Eltek Ltd. - Process Engineering" <[log in to unmask]> at
INTERNET
Date:    18/6/98 4:59 PM


Technetters,
After routing stage the PCBs are washed to remove dust , fingerprints etc .
Normally , this is done using washing machine fitted with hot water rinse ,
soft brushes , high pressure rinse , DI rinse and dryer . As long as the PCB
is bigger than , say , 7" by 4" , we have no problems . Probles are with
really small boards such as 2" by 3" or even less .
What kind of washing machines are used for such small boards ?
Edward Szpruch
Eltek Ltd - Israel
Tel  972 3 9395050
Fax 972 3 9309581
E-mail :  [log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
ext.312
################################################################

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################