If you are looking for a transparent material to put over a PCB to check
print registration....
Necessity being the mother of invention I can vouch for polyester file
separators, OHP transparencies and even cling film as effective - till
you find a specialist source.
Regards
Mike Fenner
Indium Corporation
Hosts of THE European Pb-FREE Seminar
http://quickstart-de.register.indium.net/
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Dave Dixon
Sent: 22 April 2004 22:09
To: [log in to unmask]
Subject: Re: [TN] Register Check for paste print
http://www.ewdorn.com/supplies.html
is the site for Ernst W. Dorn Co. that has some mesh materials.
I'm not sure if this is what you are looking for, but figured it was
worth a shot. Good luck,
Dave
At 03:35 PM 4/22/2004, you wrote:
>At a previous company, I used a material called "register check" (or
>something similar) from a company called Dorn (or something similar).
The
>material came in a roll and you could use it as a disposable check for
>solder paste registration. I would like to use this material again.
Does
>anyone use this or something similar? Can you tell me who might carry
it?
>
>Thanks, Cheryl
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text
in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at:
http://listserv.ipc.org/archives
>Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
>-----------------------------------------------------
Dave Dixon
Engineering Technician
Aero-Mach Labs Inc.
7707 E. Funston
Wichita, KS 67207-3121
phone (316) 219-2243
fax (316) 219-2295
www.aeromach.com
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------
:::::::::::::::::::::::::::
This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please delete and contact the sender by return and delete the material from any computer. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.
Messages sent via this medium may be subject to delays, non-delivery and unauthorized alteration. This email has been prepared using information believed by the author to be reliable and accurate, but Indium Corporation makes no warranty as to accuracy or completeness. In particular, Indium Corporation does not accept responsibility for changes made to this email after it was sent. Any opinions or recommendations expressed herein are solely those of the author. They may be subject to change without notice.
:::::::::::::::::::::::::::
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
