Hi,

Can you give me suitable product names for flux cleaning that leaves no
residue after cleaning or a recommended procedure to follow?

We are using Electrolube SafeWash2000 Aqueous Foam Cleanser (rinse with
water 2min after spraying) and 'Fluxclene' (which always leaves sticky
residue after it dries up). Any advice will be of great help.

Thanks you.
John

compuspec industries ltd
AS/NZS ISO9001:2000 Certified
T +64 9 918 1990
F +64 9 918 1970
E [log in to unmask]
W www.compuspec.com

-----Original Message-----
From: Leadfree [mailto:[log in to unmask]]On Behalf Of Fabrice Pires
Sent: Saturday, 23 June 2007 4:18 a.m.
To: [log in to unmask]
Subject: [LF] RE [LF] Flux removing


Hello Yannick,

For touch-up cleaning hydrocarbonated solvents are generally recommended.
They evaporate sufficient slowly  to allow the cleaning but also fast
enough compared to water-based solutions for correct cycle time. They also
don't need rinsing generally necessary with water-based solutions. They can
be used on SAC or SnCu finishes without reactions.
If necessary you can contact me for precise product names.

Best Regards

**********************************
Fabrice PIRES
Electronic Products Application

AVANTEC
Soldering and cleaning solutions manufacturer

Rue des Coulons BP 27
Cour de la Gare de Marchandises                Phone : +33 (0) 1 49 83 53
73
94363 BRY SUR MARNE                                 Fax : +33 (0) 1 48 81
24 40
FRANCE
e-mail : [log in to unmask]
***************************************************************************




             Yannick Brisson
             <[log in to unmask]>
             Envoyé par :                                                A
             Leadfree                  [log in to unmask]
             <[log in to unmask]                                          cc
             >
                                                                     Objet
                                       [LF] Flux removing
             22/06/2007 17:45


             Veuillez répondre
                     à
                "(Leadfree
                Electronics
             Assembly Forum)"
             <[log in to unmask]
                >; Veuillez
                répondre à
              Yannick Brisson
             <[log in to unmask]>






Hi,

             I wanted to know your input on what kind of product is good to
clean flux residues when you touch up some board, we use SAC305 and SN100C
wich is no-clean paste.

Thank you

Yannick

----------------------------------------------------------------------------
---Leadfee
 Mail List provided as a service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop/(start) delivery of Leadree for vacation breaks send:
SET Leadfree NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
---


----------------------------------------------------------------------------
---Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop/(start) delivery of Leadree for vacation breaks send:
SET Leadfree NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
----------------------------------------------------------------------------
---

-------------------------------------------------------------------------------Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop/(start) delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-------------------------------------------------------------------------------