No that is not correct. The RoHS is applied just the same as the EMC directive. So for the RoHS that means the sale of products as defined by the directive may not contain lead (or other perscribed substances) after July 2006 irrespective of how long they may have already been sold for.
Regards,
Chris
_______________________________________________
Chris James
Engineering Services Manager
Dolby Laboratories, Inc. (UK)
Direct: 01793 842136
-----Original Message-----
From: Leadfree [mailto:[log in to unmask]] On Behalf Of Brian Ellis
Sent: 05 April 2004 15:30
To: [log in to unmask]
Subject: Re: [LF] FW: Transition of WEEE and RoHS
Nick
Are you sure you really mean "placing on the market is the initial action of making a product available for the first time on the Community market, with a view to distribution or use in the Community."? If I had a factory making, say, a DVD player model XYZ1234 and I started to sell that product in the EU before 1 July 2006, I could continue to manufacture and sell it with lead-bearing solder, until 2020 or later, according to your interpretation, assuming it was so good that it remained marketable for 14+ years :-)
What a loophole !!!
Brian
[log in to unmask] wrote:
> Pascal
>
> You are quoting from the responses to DTI's first consultation. The
> second paper,
>
> http://www.dti.gov.uk/sustainability/weee/consultationpartiii.pdf
>
> part of which I have pasted below, is based on further input from the
> European Commission. Most respondents agreed with the proposal and we
> will be using this definition.
>
> I'm no legal expert but believe this means when it is first offered
> for sale rather than when it left the factory gates.
>
>
> Part III - The RoHS Directive
> Issue 2 - Definition of "Put on the Market"
> 11. Article 4 of the RoHS Directive states that "Member States shall
> ensure that, from 1 July 2006, new electrical and electronic equipment
> put on the market does not contain" any of the restricted substances.
> Considerable concern has been expressed about the term "put on the
> market" and a number of alternative interpretations have been put
> forward. The Government proposes to:
> . transpose the term "put on the market" in the implementing
> Regulations taking into account the context in which it
> appears in Article 4 of the Directive; and
> . make reference to the interpretation offered by the European
> Commission in its Guide to the implementation of Directives
> based on the New Approach and the Global Approach in the
> guidance that will be issued to assist companies to comply
> with the requirements of the Directive. That interpretation is
> that "placing on the market is the initial action of making a
> product available for the first time on the Community market,
> with a view to distribution or use in the Community."
> Question 2
> Do you agree with the Government's intended approach in
> relation to the term "put on the market"?
>
>
> Regards
>
> Nick
>
> From: Nick Jolly, Dept. of Trade & Industry
> Electronics Unit
> E-mail: [log in to unmask]
> Tel: +44 (0)20 7215 1331
> Fax: +44 (0)20 7215 1966
> Mobile: 0787 640 7444
> Snail: Bay 254
> 151 Buckingham Palace Road
> London SW1W 9SS
>
>
> -----Original Message-----
> From: Pascal Guiheneuf [mailto:[log in to unmask]]
> Sent: 05 March 2004 09:01
> To: [log in to unmask]
> Subject: Re: [LF] FW: Transition of WEEE and RoHS
>
>
> Hello, Dan,
>
> My feeling is that your concern shall be addressed by Member States
> for the transposition, before August 13th 2004. You are looking for a
> legal topics.
>
> You can have a look at
> http://www.dti.gov.uk/sustainability/weee/index.htm#Consultation_on_Go
> vernme
> nt_implementation where you will see the item addressed by UK government,
> with suggestions for the decree. They questionned people on them.
>
> ROHS DIRECTIVE QUESTION 1
> Concern has been expressed about the term 'put on the market'. Does
> this mean equipment manufactured after 30 June 2006, all equipment
> leaving the manufacturer's premises after this date or all equipment
> on sale to the final user after this date? The Government would
> welcome your views on what you consider to be the most practicable and
> unambiguous interpretation. Our initial view is that it should apply
> to goods leaving the factory gate (or, where manufacture takes place
> outside the single market, on entry to the EU).
>
> Results :
>
> Meaning for EU Countries.
> 1. No View (26%)
> 2. Manufactured After 30th June
> 2006 (14%)
> 3. Leaving Factory Gate (45%)
> 4. On Sale to Final User (1%)
> 5. Other (14%)
>
> Meaning for non-EU Countries.
> 6. No View (39%)
> 7. Entry to the EU (57%)
> 8. Other for Outside EU (4%)
>
> Alternative suggested definitions, for 'put on the market' within the
> EU,
> included:
> * 'When it is introduced for the first time into any part of the
> distribution chain in
> the EU.'
> * 'Date of manufacture as identified on the rating plate.'
> * 'The definition [...] should be the same as that defined in Clause 2.3 of
> 'Guide to
> the implementation of Directives based on the New Approach and the Global
> Approach''.
> Alternative suggested definitions, for 'put on the market' outside the EU,
> included:
> * 'goods received by the importer after 30 June 2006.'
> * 'should apply to goods leaving the factory gate even the manufacturer is
> located
> outside the single market.'
>
> Pascal GUIHENEUF
> Nortel France
>
> -----Original Message-----
> From: Kallin, Dan [mailto:[log in to unmask]]
> Sent: jeudi 4 mars 2004 21:46
> To: [log in to unmask]
> Subject: [LF] FW: Transition of WEEE and RoHS
>
>
>
>>I have a WEEE / RoHS implementation question(s) for the group . I was
>>asked,
>>
>>..... regarding the phase-in of this policy. Will current products be
>>grandfathered even if they are physically manufactured after that date
>>(and for how long) or does the grandfathering only apply to inventory
>>that is already produced and stored before the start date of the new
>>regulation?
>>
>>My understanding is as follows:
>>* the "phase in" period ENDS on July 1, 2006
>>* The directives are applied to individual products, not product
>>lines.
>>* A product is placed on the market when it leaves an EU manufacturer
>>or is cleared through an EU Country customs for distribution in an EU
>>state.
>>
>>An extreme hypothetical example may be...
>>You have two pallets of radios waiting to clear customs (i.e. 'put on
>>the market'). One clears on Friday June 30 2006. The other does not
>>clear until Monday July 3. The products on the first pallet can have
>>lead in them. The products on the second cannot.
>>
>>My questions are:
>>1 - Is my understanding correct?
>>
>>2 - Does anyone have any idea how existing, non-compliant inventory
>>will need to be managed?
>>
>>Thanks
>>__________________________________________
>>Dan Kallin Environmental & Safety Engineer
>> Bose Corporation Framingham, MA 01701
>> [log in to unmask]
>> 508-766-7136 (phone)
>> 508-766-7086 (fax)
>>__________________________________________
>>
>
>
> ----------------------------------------------------------------------
> ------
> ---Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d To
> unsubscribe, send a message to [log in to unmask] with following text in the
> BODY (NOT the subject field): SIGNOFF Leadfree To temporarily stop delivery
> of Leadree for vacation breaks send: SET Leadfree NOMAIL Search previous
> postings at: http://listserv.ipc.org/archives Please visit IPC web site
> http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information,
> or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> ----------------------------------------------------------------------------
> ---
>
> ----------------------------------------------------------------------
> ------
> ---Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Leadfree
> To temporarily stop delivery of Leadree for vacation breaks send: SET
> Leadfree NOMAIL
> Search previous postings at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
> for additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ----------------------------------------------------------------------------
> ---
>
> PLEASE NOTE: THE ABOVE MESSAGE WAS RECEIVED FROM THE INTERNET.
>
> On entering the GSi, this email was scanned for viruses by the
> Government Secure Intranet (GSi) virus scanning service supplied
> exclusively by Energis in partnership with MessageLabs.
>
> Please see
> http://www.gsi.gov.uk/main/notices/information/gsi-003-2002.pdf
> for further details.
>
> In case of problems, please call your organisational IT helpdesk
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
>
> ----------------------------------------------------------------------
> ---------Leadfee Mail List provided as a service by IPC using LISTSERV
> 1.8d To unsubscribe, send a message to [log in to unmask] with following
> text in the BODY (NOT the subject field): SIGNOFF Leadfree To
> temporarily stop delivery of Leadree for vacation breaks send: SET
> Leadfree NOMAIL Search previous postings at:
> http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
> -------------------------------------------------------------------------------
> ______________________________________________________________________
>
>
-------------------------------------------------------------------------------Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Leadfree To temporarily stop delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL Search previous postings at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-------------------------------------------------------------------------------
-----------------------------------------
This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited.
-------------------------------------------------------------------------------Leadfee Mail List provided as a service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Leadfree
To temporarily stop delivery of Leadree for vacation breaks send: SET Leadfree NOMAIL
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-------------------------------------------------------------------------------
|
