P-SMTS-2
P-SMTS-3
Surface Mount Solder Joint Inspection Posters Classes 2 & 3

New IPC Surface Mount Solder Joint Evaluation Wall Posters clearly illustrate the
limits of component misalignment and minimum solder joint sizes for three major
component types.  The minimum acceptance requirements from the IPC-A-610B and the
J-STD-001B have been visually redefined in high-quality 3-D graphics. Illustrations
include: side overhang, end overhang, end joint width, and solder thickness.
Quantity discounts for the smaller versions are available as follows: Purchase 10 or
more sets, subtract 10%; 25 or more sets, subtract 25%; 50 or more sets, subtract 50%
from the member/nonmember prices below.  Released September 1998.

8.5x11 inch SMT Inspection Guidelines for Class 2 (set of 3)
Order # PSMTS-2
IPC Member: $35  Nonmember:  $70
8.5x11 inch SMT Inspection Guidelines for Class 3 (set of 3)
Order # PSMTS-3
IPC Member: $35  Nonmember: $70

################################################################
IPC_New_Releases E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE IPC_New_Releases <your full name>
To unsubscribe:   SIGNOFF IPC_New_Releases 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################