Check out this link for more info:

http://developer.intel.com/design/motherbd/atx.htm
<http://developer.intel.com/design/motherbd/atx.htm>
--
   /\     Praegitzer Industries - Portland Design Center
  /\/\    George Patrick, Project Manager
 /\/\/\   Email:  [log in to unmask]
/\/\/\/\  Voice: (503)531-2050 x1813   Fax: (503)531-2051

Resources for PCB Designers: http://www.aracnet.com/~gpatrick
<http://www.aracnet.com/~gpatrick>



-----Original Message-----
From: David Baldwin [mailto:[log in to unmask]]
Sent: Tuesday, May 18, 1999 4:54 PM
To: [log in to unmask]
Subject: [DC] ATX Mother Board Database


Fellow Designers:

I am starting the design of my first ATX form factor mother board.  It is a
proprietary / semi-custom design, therefore it is not a "standard" mother
board design, although there is much commonality between this design and a
standard mother board.

As usual, the customer is way behind schedule and he is looking to the
designer (me) to pick up the slack.  I was hoping that someone has already
designed an ATX mother board in a PADS database and might be gracious enough
to share it with me.

I know that there are many variations of the mother board, but I thought
that I might be able to use it as a sample / guideline to help me through my
curve.

Any help or suggestions would be greatly appreciated.  Thanks in advance for
your response.

David Baldwin
__________________________________
   PCB Designs by Baldwin Tech
(480) 539-4400  FAX (480) 539-4500
   http://www.baldwin-tech.com <http://www.baldwin-tech.com/>
__________________________________

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################