Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Mon, 21 Sep 2009 10:37:52 +1000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Charles Gervasi wrote:
>> What sort of environment has the board been exposed to?
>
> It’s just been operated in the lab. I don’t think we’ve done any
> thermal testing with this board.
I note that this was a lab board, so unlikely to have had temp extremes
or vibration during use. To get a crack like this I'm thinking some
massive Z-axis expansion. On a lab board that may come about from
excessive heating during (hand?) soldering, possibly because of the
heatsinking of the track. This could lead to the barrel expanding &
damaging the track. Is the board FR4? What sort, high temp, multifunctional?
--
Regards,
Dom Bragge, CID+
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|