Hey Jack,
The etch pattern is still printed on the copper surface prior to
etch. I design the pattern that is printed, etched or deposited. I am a
Printed Circuit Board Designer.
Barbara Burcham
-----Original Message-----
From: Jack C Olson [mailto:[log in to unmask]]
Sent: Thursday, October 25, 2001 11:04 AM
To: [log in to unmask]
Subject: Re: [DC] PCB or PWB: which is correct?
Just to annoy averyone, I would point out that boards aren't
printed they are etched. I prefer "circuit board"
In fact, I don't even call myself a PCB designer anymore,
I'm a Circuit Board Designer! hey....
good luck,
Jack
Gary Koven <[log in to unmask]>@IPC.ORG>
25Oct2001 09:50 AM
Please respond to "(Designers Council Forum)" <[log in to unmask]>
Sent by: DesignerCouncil <[log in to unmask]>
To: [log in to unmask]
cc:
Subject: [DC] PCB or PWB: which is correct?
Retain Until: 11/24/2001 Retention Category: G90 - Information and Reports
Caterpillar Confidential: Green
Greetings. I am tasked with developing in-house standards and procedures,
and have been asked which is correct between PCB and PWB. I don't have a
copy of IPC-T-50 in my possession, and this discussion has gone on for
decades.
Bottom line, if anyone can point me to an official written declaration on
this subject, I'd greatly appreciate. Thanks.
Gary M. Koven, C.I.D.
Engineering Services Manager
Convacent Corporation
1043 E Morehead St, Suite 201
Charlotte, NC 28204
704.376.9300 phone
704.376.0988 fax
[log in to unmask]
www.convacent.com
----------------------------------------------------------------------------
-----
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV
1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|