DESIGNERCOUNCIL Archives

August 1999

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Need info on OSP process.
From:
Rodney Carrico <[log in to unmask]>
Reply To:
DesignerCouncil E-Mail Forum.
Date:
Wed, 11 Aug 1999 12:23:55 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (21 lines) 
Tom,
Entek burns off in the wave flow.

> -----Original Message-----
> From: Johnson, Tom [SMTP:[log in to unmask]]
> Sent: Tuesday, August 10, 1999 11:22 AM
> To:   [log in to unmask]
> Subject:      [DC] Need info on OSP process.
> Sensitivity:  Confidential
>
> Does anyone here have experience using an OSP finish on their boards?
> The engineers here are concerned that the untented vias and testpoints
> will
> end up oxidizing and shorten the life of the board.
> ===================================
> From the desk of Tom Johnson
> Nuera Communications, Inc.
> 10445 Pacific Center Court
> San Diego, CA 92121
> PH: (619) 625-2400

ATOM RSS1 RSS2