George,

I have been testing our installation of pe13 and have converted libraries, and
schematics for board layout.  I have not looked at any of the simulation files.
I know our libraries report numerous errors about simulation mapping files,
but I was told that the pe14 release should have different simulation
information.  I usually don't work with simulation, so I don't have much
detail at my finger tips.

Let me know if you have specific questions.

Harry
----

Mitch,
...... I am in the process of converting a
Cadence SCALD design to PE13 (schematic conversion with Verilog-xl
Simulation) and would be interested in talking with anyone who may have done
or will be doing the same.


George
-----------------------------------------------------------
George A. Stevens Jr.
Principal Electrical Engineer
Sanders, A Lockheed Martin Company
Nashua, NH
(603) 885-6606
[log in to unmask]

################################################################
DesignerCouncil E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DesignerCouncil <your full name>
To unsubscribe:   SIGNOFF DesignerCouncil 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################