I used the wrong word!
I apologize MICROSRIP is the correct word.
NOT stripline.
I am doing Microstrip calculations on a Microstrip construction
Sorry about that.
Here's some specifics:
Dielectric Constant = 4.5
Dielectric Height = 0.029 inches
Trace Width = 0.008 inches
Trace Thickness = 0.0024 inches
Trace Length = 1.00 inch
Inductance per inch (assumed value) = 20 nH per inch
Calculated Impedance Value for Trace = 107 ohms
Derived Capacitance from Impedance = 2pF per inch
Signal Delay along trace = 187 psec
Resonant Frequency of trace without a load = 850 MHz
Doug McKean