You Dayton guys are lucky to have Rick,
Our chapter (Gateway - St. Louis) had the pleasure of having him speak
to us last year...
good stuff!
BTW, I prefer diagonals.
Bill Brooks
CAE Mgr./Librarian
SLM Electronics
11880 Borman Dr.
St. Louis, MO 63146
314.569.0141 EXT 1660
wfbrooks"at"slme"dot"com
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Roger Stoops
Sent: Wednesday, December 17, 2003 8:27 AM
To: [log in to unmask]
Subject: Re: [DC] miter routes
Ray,
You might want to read the following article by Doug Brooks:
http://www.ultracad.com/90deg.pdf
Interesting experiment with corners...
Most corners for traces have a radius at the outside corner anyway,
equal to half the trace width, due to photoplotting. Aside from that,
are you concerned about EMI? Impedance mismatch at any corner is so
small compared to anything else that a signal might see on a board
(vias, connectors, solder joints between IC leads and board, IC frame).
Good return path design and impedance matching will probably yield the
best results more so than the type of corner you use. It's good to see
that you are covering ALL the bases, leaving no stone unturned, have all
your ducks in a row, (insert your own quaint quip here), etc.
Something to ask the forum: Do designers of interposer boards for BGAs
use arcs or diagonals for routing? That would be an interesting answer,
no?
The IPC offers some courses on high-speed design at various yearly
conventions. (If you take a course, the ones given by Rick Hartley are
very informative. I am somewhat partial, though; he's in our DC
chapter.)
BRgds,
Roger M. Stoops, CID+
Trimble Navigation Ltd., Dayton, OH, USA
Ph: +01 937.245.5288
Fax: +01 937.233.7511
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]]On Behalf Of Ray
Dwyer
Sent: Wednesday, December 17, 2003 8:25 AM
To: [log in to unmask]
Subject: [DC] miter routes
Greetings and Merry Christmas Ya'll,
At what point does an arch miter have better performance than linear
miter? And where can I read up on this subject. I don't have access to
anything like P-Spice. I generally design to high speed digital signals.
Ray Dwyer
972-371-4046
Maxim
4401 Beltwood Parkway
Dallas, Tx. 75244
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil. To set a vacation stop for delivery of DesignerCouncil
send: SET DesignerCouncil NOMAIL Search previous postings at:
www.ipc.org > On-Line Resources & Databases > E-mail Archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
------------------------------------------------------------------------
---------
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil. To set a vacation stop for delivery of DesignerCouncil
send: SET DesignerCouncil NOMAIL Search previous postings at:
www.ipc.org > On-Line Resources & Databases > E-mail Archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
------------------------------------------------------------------------
---------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To set a vacation stop for delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
