DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Modifying Gerber Data
From:
Neil Diamond <[log in to unmask]>
Date:
Mon, 02 Jun 1997 13:58:21 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (53 lines) 
Scott:

At 02:30 PM 6/2/97 -0400, Buscomb, Scott wrote:
>
>
>Does the PCB fab shop usually modify trace and pad sizes from original to   
>match their processes?
----> Typically, yes

> If so is it usually done photographically or   
>digitally in a gerber editor?
----> gerber is prefered

>
>Thanks in advance.  
>
>__________________________________
>Scott Buscomb, Senior CAD Designer
>[log in to unmask]
>voice 770 338-6170
>MTCC/Panasonic, Pager Development
>1225 Northbrook Pkwy, Ste 2-358
>Suwanee, GA USA 30024
>__________________________________
>
>***************************************************************************
>*   The mail list is provided as a service by IPC using SmartList v3.05   *
>***************************************************************************
>* To unsubscribe from this list at any time, send a message to:           *
>* [log in to unmask] with <subject: unsubscribe> and no text.*
>***************************************************************************
>* If you are having a problem with the DesignerCouncil, please contact    *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
>***************************************************************************
>
>
    ____________________
   /                   /\
  / Neil Diamond      /  \
 / [log in to unmask] /    \
/___________________/------\

***************************************************************************
*   The mail list is provided as a service by IPC using SmartList v3.05   *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact    *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2