Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Mon, 28 Mar 2005 13:11:10 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Which IPC specification will show the minimum clearance from conductive
pattern to mechanical hardware such as swage standoffs?
Right now I have approximately 0.025in (0.635mm) from via pad edge to
standoff lip edge, and want to make certain that distance will be
sufficiently robust for production.
The manufacturers' datasheets don't specify a recommended clearance, and
neither do the IPC-222X series specs.
Thanks,
======================
Gary M. Koven
Engineering Services Manager
Dynazign, Inc.
806 Tyvola Road, Suite 100
Charlotte, NC 28217
P: 704.405.1234 x210
F: 704.405.1402
http://www.dynazign.com/
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|