DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ken Barrett <[log in to unmask]>
Date:
Wed, 8 May 1996 09:10:21 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (48 lines)
Actually this is the type of discussion I'd like to see on this forum.
Ken Barrett
Cisco Systems
San Jose CA.
[log in to unmask]


----- Begin Included Message -----

>From [log in to unmask] Tue May  7 19:03:51 1996
Resent-Date: Tue, 7 May 1996 21:00:21 -0700
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
From: [log in to unmask]
Date: Tue, 07 May 96 18:55:11 CST
Encoding: 16 Text
To: [log in to unmask], [log in to unmask]
Subject: PC Board Frequency Limits
Resent-Message-ID: <"U3ffi.0.8DH.W1_Zn"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/1686
X-Loop: [log in to unmask]
Resent-Sender: [log in to unmask]
Content-Length: 659

     
     I would like any responses to be off-line for the following 
     discussion.
     
     Please use the following email address:  [log in to unmask]
     
     I made a simple mathematical model of a stripline, 1 inch trace, on 
     FR-4, nothing out of the ordinary as far as dimensions and found to my 
     surprise a resonant freq at about 800 MHz with a 20 to 40 dB roll-off 
     above 800 MHz
     
     Could someone in the RF/Microwave world of nuts and bolts pc board 
     design tell me what I'm supposed to do at say 10 GHz with regular pc 
     board materials/construction/fabrication???
     
     Thanks in advance, Doug McKean



----- End Included Message -----



ATOM RSS1 RSS2