A new utility, DrillToGerber, is available from the software download link off of 
DynaCad Design Services web page, http://www.aracnet.com/~dynacad.  With 
it, you can:
1. Convert Excellon, GE550, and Sieb & Meyer NC drill files to gerber format.
	A. Supports the following input format options:
		a. Zero Suppression (Leading, Trailing, None)
		b. Mode (Absolute, Relative)
		c. Units (English, Metric)
	B. Supports the following output format options:
		a. Type (RS-274d, RS-274x, Fire 9xxx)
2. Visually check/compare drill data.
3. Create a composit with signal layers to generate "TRUE" donuts.
4. Easily create step-and-repeat images of drill data.
5. Manipulate/edit drill data as easily as Gerber data.

DrillToGerber has an easy-to-user graphical user interface.

Ray Humphrey <[log in to unmask]>
DynaCad Design Services
Phone (503)642-4040 * FAX (503)591-8767
http://www.aracnet.com/~dynacad


***************************************************************************
*   The mail list is provided as a service by IPC using SmartList v3.05   *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact    *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************